FreeCut: The Conical Disc. This disc developed by DRONCO (patent pending) is a revolution in its field. The conical form of the disc tapers from the outer edge to the inner edge and gives the disc ideal cutting qualities. No braking effect caused by side friction, no jamming of the disc in the work piece (thus avoiding the dangerous kick-back effect). The cutting only takes place on the face side. The disc is easy to work with: pleasant, quick and safe cutting, good cutting control, no jamming.
greater safety and precision during use
does not jam during cutting
reduces the dangerous „kick-back“ effect
of the angle grinder
less heat generated
reduced side friction for unhindered cutting
perfect precision for longer cuts
light, power-saving handling using the FreeCut princip
For cutting steel and stainless steel, also suitable for non-ferrous metals. Does not contain iron, sulphur or chlorine (each 0.1%). Suitable for thin- and thick-walled profiles and solid material.
FreeCut: The cutting disc tapers towards the center
DRONCO AG – Because experts set the standard D-95632 Wunsiedel | Wiesenmühle 1 | Phone +49 (0) 9232/609-0 | Fax +49 (0) 9232/609-159